Polycom

302 Whittemore Conference Room

This room does not support Polycom. It is setup for WebEx

457 Whittemore Conference Room

This room does not support Polycom. It is setup for WebEx

657 Whittemore Conference Room

Polycom only IP: 128.173.89.184

460 Durham Conference Room

• 460 Durham Polycom Address: 128.173.92.180

Polycom

Device Setup

1. Turn on TV (Samsung Remote)
   • TV displays Polycom camera on video source COMPONENT1
2. Turn on Polycom (Polycom remote)
3. If sending computer content, plug POLYCOM CONTENT INPUT cable into computer
   • Thin VGA cable with blue connectors

Making a Call

1. Press Home button
2. Select Place a Call
3. Enter the IP address and press Call button
4. Remote site should answer automatically

Sending computer content

1. Turn on Projector over conference table (Sharp remote)
2. Change projector input to Computer 2 (Sharp remote)
3. Establish video call with remote site
4. Plug POLYCOM CONTENT INPUT cable into computer
5. Press Content button and select Computer (use the right arrow key)
6. Verify remote site can see content

Local Computer Content (No Polycom)

1. Turn on Projector over conference table (Sharp remote)
2. Change projector input to Computer 1 (Sharp remote)
3. Plug VGA INPUT cable into computer
   • Thick black VGA cable connected directly to wall