Wireless@VT Printers

To print to the Lobby Printer, you must be connected to the OpenVPN network.

Download and install the OpenVPN Windows Installer (64-bit) here: http://openvpn.net/index.php/open-source/downloads.html
During the OpenVPN install, accept the default options, and install the TAP-Windows device software when prompted.
Create and download your OpenVPN certificate here: https://wireless.vt.edu/vpn
Move your ovpn file (<pid>.ovpn) to the C:\Program Files\OpenVPN\config folder
Right click on the OpenVPN GUI icon on your desktop and select Properties
Open the Compatibility tab
Under Privilege Level, check the box for "Run this program as an Administrator" and click OK
Open OpenVPN GUI
You should now see a new network icon in the system tray on the lower right. Right click and select Connect
See the instructions for installing the printer below

Download and install Tunnelblick Double click OpenVPN file to install.

First, remove the old printer(s)

Start -> Devices & Printers -> Right click on the printer to remove and select Remove

Note: You must be connected to the OpenVPN network, or using the network in the Durham 470 student lab

Open Start -> Devices & Printers
Click on Add a Printer
Select the Add a Network Printer option
Click The printer that I want isn't listed
Select Add a printer using a TCP/IP address... and click Next
Enter the following address in the Hostname box 192.168.1.25 and click Next
Accept the default option for the rest of the process. You will be prompted for the driver that you downloaded from the link below.

If you are prompted for a driver

Download the driver for the HP LaserJet M601dn
Select your operating system and download the Driver Only option. Execute the downloaded file, unpacking the drivers to the C drive.
Install the driver from the driver folder (C:\HP_LaserJet_Enterprise_600_M601_M602_M603_printer_series)

Contents