Polycom
From CVL Wiki
(Difference between revisions)
(→460 Durham Conference Room Directions) |
|||
| Line 8: | Line 8: | ||
==460 Durham Conference Room Directions== | ==460 Durham Conference Room Directions== | ||
*460 Durham Polycom Address: 128.173.92.180 | *460 Durham Polycom Address: 128.173.92.180 | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
===Polycom=== | ===Polycom=== | ||
| Line 30: | Line 24: | ||
====Sending computer content==== | ====Sending computer content==== | ||
| + | #Turn on '''Projector''' over conference table (Sharp remote) | ||
| + | #Change projector input to '''Computer 2''' (Sharp remote) | ||
#Establish video call with remote site | #Establish video call with remote site | ||
#Plug '''POLYCOM CONTENT INPUT''' cable into computer | #Plug '''POLYCOM CONTENT INPUT''' cable into computer | ||
#Press '''Content''' button and select '''Computer''' (use the right arrow key) | #Press '''Content''' button and select '''Computer''' (use the right arrow key) | ||
#Verify remote site can see content | #Verify remote site can see content | ||
| + | |||
| + | ===Local Computer Content ('''No Polycom''')=== | ||
| + | #Turn on '''Projector''' over conference table (Sharp remote) | ||
| + | #Change projector input to '''Computer 1''' (Sharp remote) | ||
| + | #Plug '''VGA INPUT''' cable into computer | ||
| + | #* Thick black VGA cable connected directly to wall | ||
Revision as of 15:30, 25 November 2014
Contents |
457 Whittemore Conference Room Directions
THIS ROOM UNDER CONSTRUCTION!!
657 Whittemore Conference Room Directions
Polycom only IP: 128.173.89.184
460 Durham Conference Room Directions
- 460 Durham Polycom Address: 128.173.92.180
Polycom
Device Setup
- Turn on TV (Samsung Remote)
- TV displays Polycom camera on video source COMPONENT1
- Turn on Polycom (Polycom remote)
- If sending computer content, plug POLYCOM CONTENT INPUT cable into computer
- Thin VGA cable with blue connectors
Making a Call
- Press Home button
- Select Place a Call
- Enter the IP address and press Call button
- Remote site should answer automatically
Sending computer content
- Turn on Projector over conference table (Sharp remote)
- Change projector input to Computer 2 (Sharp remote)
- Establish video call with remote site
- Plug POLYCOM CONTENT INPUT cable into computer
- Press Content button and select Computer (use the right arrow key)
- Verify remote site can see content
Local Computer Content (No Polycom)
- Turn on Projector over conference table (Sharp remote)
- Change projector input to Computer 1 (Sharp remote)
- Plug VGA INPUT cable into computer
- Thick black VGA cable connected directly to wall
