Polycom
From CVL Wiki
(Difference between revisions)
(→Troubleshooting) |
|||
| Line 1: | Line 1: | ||
| − | == | + | ==457 Conference Room Directions== |
| − | + | ||
| + | ===Local Computer Content (No Polycom)=== | ||
| + | #Turn on Projector 1 over conference table (Sharp remote) | ||
| + | #Change projector input to "Computer 1" (Sharp remote) | ||
| + | #Plug "VGA INPUT" cable into computer | ||
| + | #When finished, please change projector input back to HDMI and press "Standby" button | ||
| + | |||
| + | ===Polycom | ||
| + | ====Turn on Devices==== | ||
| + | #Turn on TV (Samsung Remote) | ||
| + | #* TV displays Polycom camera on video source HDMI2 | ||
| + | #Turn on Projector 1 over conference table (Sharp Remote) | ||
| + | #* Projector 1 displays Polycom computer content on video source HDMI | ||
| + | #* Projector 1 is also speaker source for room | ||
| + | #Turn on Polycom (Polycom remote) | ||
| + | #* Point remote at camera | ||
| + | #* Be patient, boot up takes a few minutes. | ||
| + | #* Polycom home screen is on TV or Projector 2 | ||
| + | #Projector 2 mirrors Polycom display on TV (no remote) | ||
| + | #* Projector 2 displays Polycom camera on video source HDMI | ||
| + | # There are 2 cables for computer content labeled "Polycom content input" and "VGA Content" | ||
| + | #* "Polycom content input" cable is for sending computer content to remote site | ||
| + | #* "VGA INPUT" cable is for displaying locally over Projector 1 only | ||
==302 Conference Room== | ==302 Conference Room== | ||
Revision as of 10:49, 3 February 2014
Contents |
457 Conference Room Directions
Local Computer Content (No Polycom)
- Turn on Projector 1 over conference table (Sharp remote)
- Change projector input to "Computer 1" (Sharp remote)
- Plug "VGA INPUT" cable into computer
- When finished, please change projector input back to HDMI and press "Standby" button
===Polycom
Turn on Devices
- Turn on TV (Samsung Remote)
- TV displays Polycom camera on video source HDMI2
- Turn on Projector 1 over conference table (Sharp Remote)
- Projector 1 displays Polycom computer content on video source HDMI
- Projector 1 is also speaker source for room
- Turn on Polycom (Polycom remote)
- Point remote at camera
- Be patient, boot up takes a few minutes.
- Polycom home screen is on TV or Projector 2
- Projector 2 mirrors Polycom display on TV (no remote)
- Projector 2 displays Polycom camera on video source HDMI
- There are 2 cables for computer content labeled "Polycom content input" and "VGA Content"
- "Polycom content input" cable is for sending computer content to remote site
- "VGA INPUT" cable is for displaying locally over Projector 1 only
302 Conference Room
4th Floor
Troubleshooting
- Check input channel of projector
654 Whittemore
Polycom only
IP: 128.173.89.184
457 Whittemore Polycom only IP: 128.173.90.254
460 Durham Polycom only IP: 128.173.92.180
