Polycom
From CVL Wiki
(Difference between revisions)
| Line 1: | Line 1: | ||
==457 Conference Room Directions== | ==457 Conference Room Directions== | ||
| + | *457 Whittemore Polycom Address: 128.173.90.254 | ||
===Local Computer Content (No Polycom)=== | ===Local Computer Content (No Polycom)=== | ||
| Line 29: | Line 30: | ||
====Sending computer content==== | ====Sending computer content==== | ||
| + | #Establish video call | ||
#Plug '''POLYCOM CONTENT INPUT''' cable into computer | #Plug '''POLYCOM CONTENT INPUT''' cable into computer | ||
#Press '''Content''' button and select '''Computer''' | #Press '''Content''' button and select '''Computer''' | ||
#* You should see content on Projector 1 | #* You should see content on Projector 1 | ||
| − | + | #Verify remote site can see content | |
==302 Conference Room== | ==302 Conference Room== | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| Line 45: | Line 42: | ||
Polycom only | Polycom only | ||
IP: 128.173.89.184 | IP: 128.173.89.184 | ||
| − | |||
| − | |||
| − | |||
| − | |||
460 Durham | 460 Durham | ||
Polycom only | Polycom only | ||
IP: 128.173.92.180 | IP: 128.173.92.180 | ||
Revision as of 11:15, 3 February 2014
Contents |
457 Conference Room Directions
- 457 Whittemore Polycom Address: 128.173.90.254
Local Computer Content (No Polycom)
- Turn on Projector 1 over conference table (Sharp remote)
- Change projector input to "Computer 1" (Sharp remote)
- Plug "VGA INPUT" cable into computer
- When finished, please change projector input back to HDMI and press "Standby" button
Polycom
Device Setup
- Turn on TV (Samsung Remote)
- TV displays Polycom camera on video source HDMI2
- Turn on Projector 1 over conference table (Sharp Remote)
- Projector 1 displays Polycom computer content on video source HDMI
- Projector 1 is also speaker source for room
- Turn on Polycom (Polycom remote)
- Point remote at camera
- Be patient, boot up takes a few minutes.
- Polycom home screen is on TV or Projector 2
- Projector 2 mirrors Polycom display on TV (no remote)
- Projector 2 displays Polycom camera on video source HDMI
- If sending computer content, plug in "POLYCOM CONTENT INPUT" cable
Making a Call
- Press Home button
- Select Place a Call
- Enter the IP address and press Call button
- Remote site should answer automatically
Sending computer content
- Establish video call
- Plug POLYCOM CONTENT INPUT cable into computer
- Press Content button and select Computer
- You should see content on Projector 1
- Verify remote site can see content
302 Conference Room
654 Whittemore Polycom only IP: 128.173.89.184
460 Durham Polycom only IP: 128.173.92.180
