Polycom

From CVL Wiki

(Difference between revisions)
Jump to: navigation, search
(460 Durham Conference Room Directions)
(457 Whittemore Conference Room)
 
(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
==457 Whittemore Conference Room Directions==
+
==302 Whittemore Conference Room==
THIS ROOM UNDER CONSTRUCTION!!
+
This room does not support Polycom. It is setup for [[Zoom]]
  
==657 Whittemore Conference Room Directions==
+
==457 Whittemore Conference Room==
Polycom only
+
This room does not support Polycom. It is setup for [[Zoom]]
IP:  128.173.89.184
+
  
==460 Durham Conference Room Directions==
+
==654 Whittemore Conference Room==
*460 Durham Polycom Address: 128.173.92.180
+
Polycom Address: 128.173.89.184
 +
 
 +
==460 Durham Conference Room==
 +
Polycom Address: 128.173.92.180
  
 
===Polycom===
 
===Polycom===

Latest revision as of 13:14, 10 December 2018

Contents

[edit] 302 Whittemore Conference Room

This room does not support Polycom. It is setup for Zoom

[edit] 457 Whittemore Conference Room

This room does not support Polycom. It is setup for Zoom

[edit] 654 Whittemore Conference Room

Polycom Address: 128.173.89.184

[edit] 460 Durham Conference Room

Polycom Address: 128.173.92.180

[edit] Polycom

[edit] Device Setup

  1. Turn on TV (Samsung Remote)
    • TV displays Polycom camera on video source COMPONENT1
  2. Turn on Polycom (Polycom remote)
  3. If sending computer content, plug POLYCOM CONTENT INPUT cable into computer
    • Thin VGA cable with blue connectors

[edit] Making a Call

  1. Press Home button
  2. Select Place a Call
  3. Enter the IP address and press Call button
  4. Remote site should answer automatically

[edit] Sending computer content

  1. Turn on Projector over conference table (Sharp remote)
  2. Change projector input to Computer 2 (Sharp remote)
  3. Establish video call with remote site
  4. Plug POLYCOM CONTENT INPUT cable into computer
  5. Press Content button and select Computer (use the right arrow key)
  6. Verify remote site can see content

[edit] Local Computer Content (No Polycom)

  1. Turn on Projector over conference table (Sharp remote)
  2. Change projector input to Computer 1 (Sharp remote)
  3. Plug VGA INPUT cable into computer
    • Thick black VGA cable connected directly to wall
Views
Personal tools
Support