|
|
| (28 intermediate revisions by one user not shown) |
| Line 3: |
Line 3: |
| | By Syed Haider | | By Syed Haider |
| | | | |
| | + | == Note == |
| | | | |
| − | == Setting Up Standard Cell Library and Project Directory ==
| + | We had a tutorial on how to use PrimeTime Power Estimation here, but we were informed that this might violate the EULA as provided by Synopsys for the University Program. |
| − | 1. Download Oklahoma State University Library from http://vcag.ecen.okstate.edu/projects/scells/
| + | |
| | | | |
| − | Specifically, from: http://vcag.ecen.okstate.edu/projects/scells/download/iit_stdcells_v2.3beta/
| + | If you would like to see this tutorial, please contact support@ece.vt.edu |
| − | | + | |
| − | Download the iitcells_lib_2.3.tar.gz package.
| + | |
| − | | + | |
| − | | + | |
| − | 2. untar the library somewhere nice like your home directory where you will really never touch it (i.e. /home/syedh/). The Directory will be called iit_stdcells.
| + | |
| − | | + | |
| − | 3. Create a project directory somewhere else. (example: mkdir /home/syedh/Project1)
| + | |
| − | In Project1 create another directory called WORK.
| + | |
| − | | + | |
| − | 4. Back in Project1 directory create an empty file called: '''.synopsys_dc.setup'''
| + | |
| − | | + | |
| − | This file will specify to Synopsys and design_vision software what libraries you are using. A sample version of the file is listed below. The path after “/home/syedh/” should remain unchanged if this tutorial is being followed correctly!!!
| + | |
| − | | + | |
| − | \# .synopsys_dc.setup file
| + | |
| − | \# Define the target tehcnology library, symbol library,
| + | |
| − | \# and link libraries
| + | |
| − | set target_library /home/syedh/iit_stdcells/lib/tsmc018/lib/iit018_stdcells.db
| + | |
| − | \#do not have a symbol library
| + | |
| − | \#set symbol_library
| + | |
| − | | + | |
| − | \#set link library (set as same as target library)
| + | |
| − | | + | |
| − | set link_library “/home/syedh/iit_stdcells/lib/tsmc018/lib/iit018_stdcells.db *”
| + | |
| − | | + | |
| − | set designer "Your Name"
| + | |
| − | | + | |
| − | 5. Copy /home/syedh/iit_stdcells/lib/tsmc018/lib/iit018_stdcells.v into Project1 Directory.
| + | |
| − | | + | |
| − | 6. Now it is design time. Create verilog description of something amazing. Here is a design of a full adder and some registers that spans multiple design files (full_adder.v, top.v):
| + | |
| − | | + | |
| − | //full_adder.v
| + | |
| − | //This is a module for a 1 bit Full Adder
| + | |
| − | module full_adder(a,b, c_in, s, c_out);
| + | |
| − | | + | |
| − | input a, b, c_in;
| + | |
| − | output wire s, c_out;
| + | |
| − | | + | |
| − | assign s = a ^ b ^ c_in;
| + | |
| − | assign c_out = ((a & b)) | (c_in & (a^b));
| + | |
| − | | + | |
| − | endmodule
| + | |
| − | | + | |
| − | ////////////////////////////////////////////////////////////////////////////////
| + | |
| − | | + | |
| − | //top.v
| + | |
| − | //This contains a full adder with some registers for input and output.
| + | |
| − | `timescale 1ns/10ps
| + | |
| − | module top (clk, a, b, c_in, sum, c_out);
| + | |
| − | | + | |
| − | input clk, a, b, c_in;
| + | |
| − | output sum, c_out;
| + | |
| − | | + | |
| − | reg in_a;
| + | |
| − | reg in_b;
| + | |
| − | reg sum_reg;
| + | |
| − | reg c_out_reg;
| + | |
| − | reg c_in_reg;
| + | |
| − | | + | |
| − | full_adder fa1(.a(in_a), .b(in_b), .c_in(c_in_reg), .s(sum), .c_out(c_out));
| + | |
| − | | + | |
| − | always @(posedge clk)
| + | |
| − | begin
| + | |
| − | in_a = a;
| + | |
| − | in_b = b;
| + | |
| − | c_in_reg = c_in;
| + | |
| − | c_out_reg = c_out;
| + | |
| − | sum_reg = sum;
| + | |
| − | end
| + | |
| − | endmodule
| + | |
| − | | + | |
| − | 7. Now it is time to create a test bench file to test the design. The things that will be highlighted in purple are system tasks that will create dumps (value change dumps) of signals in your design.
| + | |
| − | | + | |
| − | //tb_top.v
| + | |
| − | //testbench
| + | |
| − | `timescale 1ns/10ps
| + | |
| − | module tb_top();
| + | |
| − | | + | |
| − | reg clk;
| + | |
| − | reg a, b, c_in;
| + | |
| − | wire c_out, sum;
| + | |
| − | | + | |
| − | //clocking description
| + | |
| − | initial
| + | |
| − | begin
| + | |
| − | clk = 0;
| + | |
| − | end
| + | |
| − | | + | |
| − | | + | |
| − | //clock period is #100
| + | |
| − | always begin
| + | |
| − | #50
| + | |
| − | clk = ~clk;
| + | |
| − | end
| + | |
| − | | + | |
| − | //initialize input to full adder
| + | |
| − | initial begin
| + | |
| − | a = 0;
| + | |
| − | b = 0;
| + | |
| − | c_in = 0;
| + | |
| − | end
| + | |
| − | | + | |
| − | ///////////////////////////////
| + | |
| − | // Toggle the inputs at varying rates
| + | |
| − | ///////////////////////////////
| + | |
| − | | + | |
| − | //toggle carry_in
| + | |
| − | initial begin
| + | |
| − | #60;
| + | |
| − | repeat (50)
| + | |
| − | begin
| + | |
| − | c_in <= ~c_in;
| + | |
| − | #100;
| + | |
| − | end
| + | |
| − | end
| + | |
| − | | + | |
| − | //toggle a
| + | |
| − | initial begin
| + | |
| − | #60;
| + | |
| − | repeat (25)
| + | |
| − | begin
| + | |
| − | a <= ~a;
| + | |
| − | #200;
| + | |
| − | end
| + | |
| − | end
| + | |
| − | | + | |
| − | //toggle b and setup vcd dump
| + | |
| − | initial begin
| + | |
| − | $dumpfile("dmp_top.vcd"); //read verilog book for more info on system command
| + | |
| − | $dumpvars(0,top);
| + | |
| − | #60;
| + | |
| − | $dumpon;
| + | |
| − | repeat (10)
| + | |
| − | begin
| + | |
| − | b <= ~b;
| + | |
| − | #500;
| + | |
| − | end
| + | |
| − | $dumpoff;
| + | |
| − | $finish; //ends simulation
| + | |
| − | end
| + | |
| − | | + | |
| − | //Module under test
| + | |
| − | top uut(.clk(clk), .a(a), .b(b), .c_in(c_in), .sum(sum), .c_out(c_out));
| + | |
| − | | + | |
| − | endmodule
| + | |
| − | | + | |
| − | 8. Now comes the time to create a synthesized top level design from {full_adder.v top.v}. We are interested in creating a synthesized version of “top”. At command prompt type the following:
| + | |
| − | | + | |
| − | Synopsys
| + | |
| − | design_vision
| + | |
| − | | + | |
| − | Now a design_vision gui has started up. In this gui follow these steps:
| + | |
| − | | + | |
| − | In Menu: File --> Analyze.
| + | |
| − | A Dialog box will appear called “Analyze Designs”. Click the “Add..” button and add every design file {full_adder.v top.v}. You can do this one file at a time or all at one time by using the CTRL key to select multiple files. After adding all the files press OK.
| + | |
| − |
| + | |
| − | | + | |
| − | In Menu: Design --> Elaborate.
| + | |
| − | A Dialog box will appear called “Elaborate Designs”. There will be a drop down selection menu called “Design”. In this selection menu there will be two objects listed: top(verilog) and full_adder(verilog). Make sure that top(verilog) is selected. Press OK.
| + | |
| − |
| + | |
| − | Now in the Design Vision the “Hier 1” window will have objects listed in it.
| + | |
| − |
| + | |
| − | In Menu: Design --> Compile. In the dialog box that shows up press OK.
| + | |
| − |
| + | |
| − | | + | |
| − | In Menu: File --> Save As. Save the design as a verilog design with a new name (ex. top_syn.v).
| + | |
| − | | + | |
| − | 9. Exit the gui and in the command prompt type exit to quit out of the design_vision_xg_t shell. Then type exit again to quit Synopsys.
| + | |
| − | | + | |
| − | 10. Now it is time to simulate the synthesized design, top_syn.v, with the testbench, tb_top.v. The verilog simulator program of Synopsys is called VCX. The first step is to write a script for the simulation:
| + | |
| − | | + | |
| − | #vcs_script.scr
| + | |
| − | #This is a script file for VCX simulator
| + | |
| − | ./tb_top.v
| + | |
| − | ./top_syn.v
| + | |
| − | -v ./iit018_stdcells.v
| + | |
| − | +libext+.v +nolibcell +define+VPD+SAIF+VCD+SDF
| + | |
| − | | + | |
| − | | + | |
| − | 11. At command prompt type: Synopsys
| + | |
| − | | + | |
| − | Now type: vcs -f vcs_script.scr
| + | |
| − | | + | |
| − | The result of running this command is that an executable called simv is created.
| + | |
| − | | + | |
| − | 12. Run simv : ./simv
| + | |
| − | | + | |
| − | 13. Now the file dmp_top.vcd has been created.
| + | |
| − | | + | |
| − | 14. Now we will use a tool called PrimeTime-Px to get power estimation. The following script called power.scr will be used.
| + | |
| − | | + | |
| − | #power.scr
| + | |
| − | set power_enable_analysis TRUE
| + | |
| − | set target_library "/home/syedh/iit_stdcells/lib/tsmc018/lib/iit018_stdcells.db"
| + | |
| − | set link_library "/home/syedh/iit_stdcells/lib/tsmc018/lib/iit018_stdcells.db *"
| + | |
| − | | + | |
| − | read_db $target_library
| + | |
| − | read_verilog top_syn.v
| + | |
| − | current_design test_inverter
| + | |
| − | link
| + | |
| − | read_vcd dmp_top.vcd -strip_path tb_top/uut
| + | |
| − | create_power_waveforms –output vcd
| + | |
| − | report_power
| + | |
| − | | + | |
| − | 15. At the Synopsys command prompt type: pt_shell
| + | |
| − | Now run the power.scr: source power.scr
| + | |
| − | | + | |
| − | 16. If all went right the output from the script should look something like this:
| + | |
| − | ======================================================================
| + | |
| − | Summary:
| + | |
| − | Total number of nets = 11
| + | |
| − | Number of annotated nets = 11 (100.00%)
| + | |
| − | Total number of leaf cells = 7
| + | |
| − | Number of fully annotated leaf cells = 7 (100.00%)
| + | |
| − | ======================================================================
| + | |
| − | | + | |
| − | Information: The waveform options are:
| + | |
| − | File name: power_waves.fsdb
| + | |
| − | File format: fsdb
| + | |
| − | Time interval: 0.01ns
| + | |
| − | Hierarchical level: all
| + | |
| − | | + | |
| − | Information: Power analysis is running, please wait ...
| + | |
| − | | + | |
| − | Information: analysis is done for time window (0ns - 5050ns)
| + | |
| − | | + | |
| − | ****************************************
| + | |
| − | Report : Event Based Power
| + | |
| − | Design : top
| + | |
| − | Version: Z-2007.06-SP3
| + | |
| − | Date : Wed Feb 13 14:34:11 2008
| + | |
| − | ****************************************
| + | |
| − | | + | |
| − | | + | |
| − | | + | |
| − | Attributes
| + | |
| − | ----------
| + | |
| − | i - Including register clock pin internal power
| + | |
| − | u - User defined power group
| + | |
| − | | + | |
| − | Internal Switching Leakage Total
| + | |
| − | Power Group Power Power Power Power ( %) Attrs
| + | |
| − | --------------------------------------------------------------------------------
| + | |
| − | io_pad 0.0000 0.0000 0.0000 0.0000 ( 0.00%)
| + | |
| − | memory 0.0000 0.0000 0.0000 0.0000 ( 0.00%)
| + | |
| − | black_box 0.0000 0.0000 0.0000 0.0000 ( 0.00%)
| + | |
| − | clock_network 3.292e-06 0.0000 0.0000 3.292e-06 (58.67%) i
| + | |
| − | register 6.722e-07 4.735e-07 4.822e-10 1.146e-06 (20.42%)
| + | |
| − | combinational 8.640e-07 3.086e-07 4.037e-10 1.173e-06 (20.90%)
| + | |
| − | sequential 0.0000 0.0000 0.0000 0.0000 ( 0.00%)
| + | |
| − | | + | |
| − | Net Switching Power = 7.821e-07 (13.94%)
| + | |
| − | Cell Internal Power = 4.828e-06 (86.05%)
| + | |
| − | Cell Leakage Power = 8.859e-10 ( 0.02%)
| + | |
| − | ---------
| + | |
| − | Total Power = 5.611e-06 (100.00%)
| + | |
| − | | + | |
| − | X Transition Power = 0.0000
| + | |
| − | Glitching Power = 2.152e-08
| + | |
| − | | + | |
| − | Peak Power = 4.726e-03
| + | |
| − | Peak Time = 550.100
| + | |
Power Estimation with OSU Standard Cell Library and Synopsys tools (PrimeTime-Px)
We had a tutorial on how to use PrimeTime Power Estimation here, but we were informed that this might violate the EULA as provided by Synopsys for the University Program.
