Polycom
From CVL Wiki
(Difference between revisions)
(→460 Durham Conference Room Directions) |
|||
| Line 1: | Line 1: | ||
==457 Whittemore Conference Room Directions== | ==457 Whittemore Conference Room Directions== | ||
| − | + | THIS ROOM UNDER CONSTRUCTION!! | |
| − | === | + | ==657 Whittemore Conference Room Directions== |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
Polycom only | Polycom only | ||
IP: 128.173.89.184 | IP: 128.173.89.184 | ||
| Line 72: | Line 34: | ||
#Press '''Content''' button and select '''Computer''' (use the right arrow key) | #Press '''Content''' button and select '''Computer''' (use the right arrow key) | ||
#Verify remote site can see content | #Verify remote site can see content | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 14:14, 25 November 2014
Contents |
457 Whittemore Conference Room Directions
THIS ROOM UNDER CONSTRUCTION!!
657 Whittemore Conference Room Directions
Polycom only IP: 128.173.89.184
460 Durham Conference Room Directions
- 460 Durham Polycom Address: 128.173.92.180
Local Computer Content (No Polycom)
- Turn on Projector 1 over conference table (Sharp remote)
- Change projector input to Computer 1 (Sharp remote)
- Plug VGA INPUT cable into computer
- Thick black VGA cable connected directly to wall
Polycom
Device Setup
- Turn on TV (Samsung Remote)
- TV displays Polycom camera on video source COMPONENT1
- Turn on Polycom (Polycom remote)
- If sending computer content, plug POLYCOM CONTENT INPUT cable into computer
- Thin VGA cable with blue connectors
Making a Call
- Press Home button
- Select Place a Call
- Enter the IP address and press Call button
- Remote site should answer automatically
Sending computer content
- Establish video call with remote site
- Plug POLYCOM CONTENT INPUT cable into computer
- Press Content button and select Computer (use the right arrow key)
- Verify remote site can see content
