Polycom
From CVL Wiki
(Difference between revisions)
(→457 Whittemore Conference Room) |
|||
| Line 5: | Line 5: | ||
This room does not support Polycom. It is setup for [[Webex]] | This room does not support Polycom. It is setup for [[Webex]] | ||
| − | == | + | ==654 Whittemore Conference Room== |
| − | Polycom | + | Polycom Address: 128.173.89.184 |
| − | + | ||
==460 Durham Conference Room== | ==460 Durham Conference Room== | ||
| − | + | Polycom Address: 128.173.92.180 | |
===Polycom=== | ===Polycom=== | ||
Revision as of 15:35, 23 July 2015
Contents |
302 Whittemore Conference Room
This room does not support Polycom. It is setup for Webex
457 Whittemore Conference Room
This room does not support Polycom. It is setup for Webex
654 Whittemore Conference Room
Polycom Address: 128.173.89.184
460 Durham Conference Room
Polycom Address: 128.173.92.180
Polycom
Device Setup
- Turn on TV (Samsung Remote)
- TV displays Polycom camera on video source COMPONENT1
- Turn on Polycom (Polycom remote)
- If sending computer content, plug POLYCOM CONTENT INPUT cable into computer
- Thin VGA cable with blue connectors
Making a Call
- Press Home button
- Select Place a Call
- Enter the IP address and press Call button
- Remote site should answer automatically
Sending computer content
- Turn on Projector over conference table (Sharp remote)
- Change projector input to Computer 2 (Sharp remote)
- Establish video call with remote site
- Plug POLYCOM CONTENT INPUT cable into computer
- Press Content button and select Computer (use the right arrow key)
- Verify remote site can see content
Local Computer Content (No Polycom)
- Turn on Projector over conference table (Sharp remote)
- Change projector input to Computer 1 (Sharp remote)
- Plug VGA INPUT cable into computer
- Thick black VGA cable connected directly to wall
