Polycom

From CVL Wiki

(Difference between revisions)
Jump to: navigation, search
Line 7: Line 7:
 
#When finished, please change projector input back to HDMI and press "Standby" button
 
#When finished, please change projector input back to HDMI and press "Standby" button
  
===Polycom
+
===Polycom===
====Turn on Devices====
+
====Device Setup====
 
#Turn on TV (Samsung Remote)
 
#Turn on TV (Samsung Remote)
 
#* TV displays Polycom camera on video source HDMI2
 
#* TV displays Polycom camera on video source HDMI2
Line 20: Line 20:
 
#Projector 2 mirrors Polycom display on TV (no remote)
 
#Projector 2 mirrors Polycom display on TV (no remote)
 
#* Projector 2 displays Polycom camera on video source HDMI
 
#* Projector 2 displays Polycom camera on video source HDMI
# There are 2 cables for computer content labeled "Polycom content input" and "VGA Content"
+
#If sending computer content, plug in "POLYCOM CONTENT INPUT" cable
#* "Polycom content input" cable is for sending computer content to remote site
+
 
#* "VGA INPUT" cable is for displaying locally over Projector 1 only
+
====Making a Call====
 +
#Press '''Home''' button
 +
#Select '''Place a Call'''
 +
#Enter the IP address and press '''Call''' button
 +
#Remote site should answer automatically
 +
 
 +
====Sending computer content====
 +
#Plug '''POLYCOM CONTENT INPUT''' cable into computer
 +
#Press '''Content''' button and select '''Computer'''
 +
#* You should see content on Projector 1
 +
 
  
 
==302 Conference Room==
 
==302 Conference Room==

Revision as of 12:06, 3 February 2014

Contents

457 Conference Room Directions

Local Computer Content (No Polycom)

  1. Turn on Projector 1 over conference table (Sharp remote)
  2. Change projector input to "Computer 1" (Sharp remote)
  3. Plug "VGA INPUT" cable into computer
  4. When finished, please change projector input back to HDMI and press "Standby" button

Polycom

Device Setup

  1. Turn on TV (Samsung Remote)
    • TV displays Polycom camera on video source HDMI2
  2. Turn on Projector 1 over conference table (Sharp Remote)
    • Projector 1 displays Polycom computer content on video source HDMI
    • Projector 1 is also speaker source for room
  3. Turn on Polycom (Polycom remote)
    • Point remote at camera
    • Be patient, boot up takes a few minutes.
    • Polycom home screen is on TV or Projector 2
  4. Projector 2 mirrors Polycom display on TV (no remote)
    • Projector 2 displays Polycom camera on video source HDMI
  5. If sending computer content, plug in "POLYCOM CONTENT INPUT" cable

Making a Call

  1. Press Home button
  2. Select Place a Call
  3. Enter the IP address and press Call button
  4. Remote site should answer automatically

Sending computer content

  1. Plug POLYCOM CONTENT INPUT cable into computer
  2. Press Content button and select Computer
    • You should see content on Projector 1


302 Conference Room

4th Floor

Troubleshooting

  • Check input channel of projector


654 Whittemore Polycom only IP: 128.173.89.184

457 Whittemore Polycom only IP: 128.173.90.254

460 Durham Polycom only IP: 128.173.92.180

Views
Personal tools
Support