Polycom

From CVL Wiki

(Difference between revisions)
Jump to: navigation, search
(Troubleshooting)
Line 1: Line 1:
==In Progress==
+
==457 Conference Room Directions==
Working on details
+
 
 +
===Local Computer Content (No Polycom)===
 +
#Turn on Projector 1 over conference table (Sharp remote)
 +
#Change projector input to "Computer 1" (Sharp remote)
 +
#Plug "VGA INPUT" cable into computer
 +
#When finished, please change projector input back to HDMI and press "Standby" button
 +
 
 +
===Polycom
 +
====Turn on Devices====
 +
#Turn on TV (Samsung Remote)
 +
#* TV displays Polycom camera on video source HDMI2
 +
#Turn on Projector 1 over conference table (Sharp Remote)
 +
#* Projector 1 displays Polycom computer content on video source HDMI
 +
#* Projector 1 is also speaker source for room
 +
#Turn on Polycom (Polycom remote)
 +
#* Point remote at camera
 +
#* Be patient, boot up takes a few minutes.
 +
#* Polycom home screen is on TV or Projector 2
 +
#Projector 2 mirrors Polycom display on TV (no remote)
 +
#* Projector 2 displays Polycom camera on video source HDMI
 +
# There are 2 cables for computer content labeled "Polycom content input" and "VGA Content"
 +
#* "Polycom content input" cable is for sending computer content to remote site
 +
#* "VGA INPUT" cable is for displaying locally over Projector 1 only
  
 
==302 Conference Room==
 
==302 Conference Room==

Revision as of 11:49, 3 February 2014

Contents

457 Conference Room Directions

Local Computer Content (No Polycom)

  1. Turn on Projector 1 over conference table (Sharp remote)
  2. Change projector input to "Computer 1" (Sharp remote)
  3. Plug "VGA INPUT" cable into computer
  4. When finished, please change projector input back to HDMI and press "Standby" button

===Polycom

Turn on Devices

  1. Turn on TV (Samsung Remote)
    • TV displays Polycom camera on video source HDMI2
  2. Turn on Projector 1 over conference table (Sharp Remote)
    • Projector 1 displays Polycom computer content on video source HDMI
    • Projector 1 is also speaker source for room
  3. Turn on Polycom (Polycom remote)
    • Point remote at camera
    • Be patient, boot up takes a few minutes.
    • Polycom home screen is on TV or Projector 2
  4. Projector 2 mirrors Polycom display on TV (no remote)
    • Projector 2 displays Polycom camera on video source HDMI
  5. There are 2 cables for computer content labeled "Polycom content input" and "VGA Content"
    • "Polycom content input" cable is for sending computer content to remote site
    • "VGA INPUT" cable is for displaying locally over Projector 1 only

302 Conference Room

4th Floor

Troubleshooting

  • Check input channel of projector


654 Whittemore Polycom only IP: 128.173.89.184

457 Whittemore Polycom only IP: 128.173.90.254

460 Durham Polycom only IP: 128.173.92.180

Views
Personal tools
Support