Freeware Layout Editor

From CVL Wiki

Revision as of 20:28, 24 January 2009 by Snsnair (Talk | contribs)

Jump to: navigation, search

This program is best operated from the CVL workstations rather than remote access unless you wish to test your patience. Alternately, you could download the recent version directly from the website listed at the bottom of this page.


To launch the program, login to CVL and execute the command
[login@cvlxx ~]layout-mems &



This customized version has an extra feature when compared to the download from the website. It has a "3D Add-on" for viewing 3D models of some simple structures which are based on a predefined 4-layer process, described in order below
Substrate Etch - Layer 4 - Positive PR and Dark Field & etch
Oxide Etch - Layer 9 - Positive PR and Dark Field & etch
PolySilicon Deposition - layer 14 - Positive PR and Clear Field & etch
Metal deposit - Layer 19 - Positive PR and Dark Field & Liftoff
If your layout conforms to this process, you can view the 3D model as follows


Go to "Utilities->Macros" and select "MEMS Technology".
This prepares the layers for further process simulation. To verify check the names of the layers. Obviously, your features should be in the layers as numbered above.


In the Topcell go to "Utilities->Macros" and select "3D View Normalizer_v1".
A new cell should be created with the name "3D_Trans".


Now go to "Utilities->3D Addon" and select "Render Addon"
The 3D View should now be displayed in a separate window.


To be updated further....



Official Website
Freeware LayoutEditor

Views
Personal tools
Support